Matsutec HC-402 NMEA 4 in 1 digital signal Synthesizer

HC-402 

   NMEA Digital Signal Conversion Synthesizer

1. Function overview

NMEA digital signal conversion synthesizer (model: HC-402) provides 4 channels of serial data input (NMEA0183 protocol) and converts and synthesizes into two channels of serial output (NMEA0183 protocol), the baud rate of each serial port input can be automatically selected: 2400-115200 , The default baud rate of the synthesized output signal is 38400 (the output baud rate can be set to 4800-38400). This product is suitable for: devices with only one serial port input, such as LOWRANCE, RAYMARINE, GARMIN, SIMRAD radar, etc.

2. Instructions for Use

1. The serial port input signal must conform to the NMEA0183 protocol format sentence; for example: heading sentence $HDHDT,123.0,T*2E. 2. When each serial port input signal is converted and synthesized, the original input data will be maintained, and the sentence format has been converted. For example, the original format is as follows: $HCHDT,123.0,T*2E; the output data is also the same, but the baud rate Has been changed to 38400; The sentence has become: $HEHDT,123.0,T*hh;

E.g:

1) Input sentence format:

The 1st serial port statement is the heading statement

$HEHDM,282.0,T*3E

The 2nd serial port sentence is GPS sentence $GPRMC,090951,A,2304.5504,N,11325.8370,E,000.0,000.0,120917,002.6,W*61

The 3rd serial port statement is AIS statement

!AIVDM,1,1,0,A,16:FDnPP0087U?gwl2588,0*29

The 4th serial port statement is a log statement

$HCVBW,20.3,1.5,A,23.1,1.2,A,1.1,A,1.5,A*4A

2)    Output sentence format: The output signal is output in two ways at the same time. The output sentence is the sum of all the sentences after synthesis.

The signal format complies with the RS-422 standard, and the baud rate is 38400.

$HEHDT,282.0,T*3E

$GPRMC,090951,A,2304.5504,N,11325.8370,E,000.0,000.0,120917,002.6,W*61 !AIVDM,1,1,0,A,16:FDnPP0087U?gwl2588,0*29

$HCVBW,20.3,1.5,A,23.1,1.2,A,1.1,A,1.5,A*4A

• Output Baud Rate set up：

Open the box，Adjust the Switch“S1” ON/OFF Status to change the output Baud rate:

Baud Rate      4800    9600    19200    38400

Swithc S1-1     OFF      ON      OFF     ON

Switch S1-2      OFF      OFF     ON      ON

三、Electric Diagram

1、 Connect Power ，POWER Indicator LED —— Light

2、When Input signal，The related LED —— Flash

3、 Output signal LED   —— Flash

4、Interface definition and cable definition

1）Input NMEA1-NMEA4 ：

A1 —  1st  NMEA1  Input  A

B1 —  1st  NMEA1  Input  B

A2 — 2nd  NMEA2  Input  A

B2 — 2nd  NMEA2  input B

A3 — 3rd  NMEA3  input A

B3 — 3rd  NMEA3  input B

A4 — 4th  NMEA4  input A

B4 — 4th  NMEA4  input B

2）Output  OUT1 and OUT2 ：

A — NMEA Out A

B — NMEA Out B

3）24+ — Power DC +

4）24- — Power DC-

5 . Dimension

1、 Product Size ：115(L)*90(W)*40(H) （mm）

2、 Install Hole size：105(L)*70(W)（mm